Burbank Airport Tower Goes ATC Zero: Pilots Land With No Controllers (Nov 2026)
On Wednesday evening, November 18, 2026, the control tower at Hollywood Burbank Airport (BUR) had no controller on duty. A controller announced on frequency that the airport was "going ATC Zero," and arriving and departing pilots switched to a shared radio channel to announce their own positions. The FAA says staffing was the cause, that Southern California TRACON took over the tower's airspace, and that operations were back to normal by Thursday morning.
What happened
According to KTLA, several planes landed at Hollywood Burbank Airport on Wednesday, November 18, with no air traffic controller in the tower. KTLA reported that a controller could be heard saying the airport was going "ATC Zero," meaning no active controller was on duty. MyNewsLA, citing audio from the frequency, reported that the controller declared "ATC Zero" and then transmissions ended, and that pilots of incoming planes were switched from the tower frequency to the Common Traffic Advisory Frequency (CTAF) to coordinate landings.
Simple Flying, which credits CBS Los Angeles with the first report, says the audio captured Southwest Airlines and Alaska Airlines crews announcing their positions to each other. It reports a Southwest crew calling short final for runway 8 and an Alaska crew announcing it was taxiing from the terminal area to the holding pad. It also reports that a controller covering the wider region kept guiding aircraft toward Burbank, then told them to switch to CTAF for the final stage of the approach, and that one pilot was heard saying, "Hey, they have no controller right now. They're CTAF."
No flight numbers have been published, so this page does not name any flights. No injuries, incidents or loss of separation have been reported in the coverage reviewed.
| Date | Wednesday evening, 18 Nov 2026 (Pacific Standard Time) |
|---|---|
| Airport | Hollywood Burbank Airport (BUR / KBUR), Burbank, California |
| Status | "ATC Zero": no active controller on duty in the tower |
| Duration | Not officially stated. Simple Flying reports at least two periods of about 30 minutes each. KTLA says it was unclear how long the tower remained empty |
| Who covered the airspace | Southern California TRACON, per the FAA statement quoted by KTLA |
| Pilot procedure | CTAF self-announcing (Simple Flying reports Southwest and Alaska crews on the audio; flights not identified) |
| Cause (per the FAA) | "Staffing issues," per the FAA statement to KTLA. Further detail not released |
| Outcome | Planes landed; FAA says operations were back to normal Thursday morning. No injuries or incidents reported in the coverage reviewed |
Timeline, as reported
Exact times were not published, so this is the order reported, not a minute-by-minute log. Local times are Pacific Standard Time.
- Wednesday evening, Nov 18 — A Burbank controller announces on frequency that the tower is "going ATC Zero" (KTLA, MyNewsLA). Simple Flying adds that the controller said radar services were being terminated. Pilots switch to CTAF (MyNewsLA, Simple Flying).
- Wednesday evening, at least twice — Simple Flying reports the situation happened at least twice that evening, each time for about 30 minutes, and that CBS LA's source warned it could happen again. KTLA's article carries an editor's note saying it was updated to correct the timeline, and says it is unclear how long the tower was empty. Treat the "twice, about 30 minutes" figures as reported by one outlet, not as an FAA confirmation.
- Wednesday 10:30 p.m. to Thursday 5:30 a.m. — Patch reported that an aviation notice designated 118.7 MHz as the frequency for monitoring airport operations for that seven-hour window. Patch said the notice does not establish that the tower was unstaffed for that whole period.
- Thursday, Nov 19, morning — The FAA cites staffing issues in a statement and says operations had returned to normal (KTLA).
What "ATC Zero" means
ATC Zero is one of three designations the FAA uses, alongside ATC Alert and ATC Limited, to describe reduced or unavailable service at an air traffic facility (Simple Flying). At ATC Zero, no controller is available at that facility. Another facility takes over part of the workload, and pilots at the affected airport announce their positions and intentions on CTAF.
It does not mean the airspace is empty or that nobody is watching. In this case, per the FAA's statement quoted by KTLA, "Following standard procedures, Southern California TRACON took over the tower's airspace."
How CTAF self-announcing works
CTAF is the shared radio channel pilots use at airports without an operating tower to announce where they are and what they plan to do (AeroXplorer's description; the same procedure is described by Simple Flying). Pilots broadcast when they are taxiing, approaching the runway, taking off, on final, or landing, so everyone nearby builds the same picture of who is where. There is no controller to clear anyone; each crew sequences itself and relies on the radio calls and on looking out the window.
CTAF is routine at small airports. Simple Flying notes it is more significant at a busy commercial airport like Burbank, a Class C airport served by Southwest, Alaska, American, Delta and United that typically handles more than 100 daily flights. Airline crews are trained for uncontrolled-field procedures; the point of the TRACON handoff is that arrivals stay under radar service until the last stage of the approach.
What the FAA said
The FAA statement quoted by KTLA, the only FAA text published in the coverage reviewed:
"Following standard procedures, Southern California TRACON took over the tower's airspace. When staffing issues occur, the FAA ensures safety by slowing the rate of arrivals into an airport."
KTLA also reported that operations had returned to normal as of Thursday morning, according to the FAA. AeroXplorer notes that the statement does not say why the tower had no controllers on duty or how many had been scheduled. Early MyNewsLA reporting said the FAA had not yet released a statement; the FAA statement came Thursday.
Staffing context
Only what the sources report:
- The FAA cited "staffing issues" (KTLA). It has not given a more specific cause in the coverage reviewed.
- Simple Flying reports that there are suggestions the interruptions were linked to mandatory rest breaks for a lone controller on duty, and says neither the FAA nor the airport has confirmed the reason. This is unconfirmed and is not repeated as fact here.
- Simple Flying reports that this is the second time in just over a year Burbank's tower has been left without controllers. On October 6, 2025, it says, the tower had no controllers for nearly six hours during a 43-day federal government shutdown, Southern California TRACON handled operations remotely from San Diego, and average delays exceeded two hours. The November 2026 event has not been tied to a shutdown or to any specific cause beyond the FAA's "staffing issues."
- Simple Flying says Burbank's airspace has been named among high-risk "hotspots" because of the mix of helicopter and airplane movements and its proximity to Van Nuys Airport. Simple Flying does not name the source of that characterization, so attribute it to Simple Flying only.
- Reports so far do not describe delays or cancellations Wednesday night (AeroXplorer). The FAA says it slowed arrivals (KTLA).
Audio
The audio comes from recordings of the frequency that news outlets reviewed (MyNewsLA, Simple Flying). We have not verified a public audio link for this event, so none is embedded here. If one is confirmed later (a LiveATC archive, an ATC.com recording, or a posted video), we will add it with its source and date.
What this teaches
Three controller takeaways, none of them findings about Burbank:
A tower going dark moves the job, it does not remove it
Southern California TRACON took the tower's airspace. Approach controllers keep arrivals sequenced and under radar service, then hand the final stage to pilots on CTAF. Where the line between the two sits is a coordination problem, and the handoff is the delicate part.
Slowing the flow is the safety tool
The FAA's statement says it slows the rate of arrivals when staffing is short. Fewer aircraft in the area means fewer conflicts for pilots to resolve by radio. It is the same logic as spacing in the game: when you can't add controllers, you cut traffic.
Pilots need the same picture as a controller
CTAF only works if every call is clear and complete: who, where, and what next. That is the same discipline as a good readback.
Try it from the controller's chair
SectorLive puts you at a real radar position in Southern California, with real runways, real procedures and live traffic, and AI controllers in every other seat. It runs in your browser, free. Keep jets 3 miles or 1,000 feet apart, sequence arrivals, and hand them off cleanly to the next controller.
Burbank Airport ATC Zero: common questions
Did Burbank Airport really have no air traffic controllers?
On Wednesday evening, Nov. 18, 2026, the tower had no active controller on duty at least once, according to KTLA, MyNewsLA and Simple Flying. The FAA cited staffing issues. Southern California TRACON took over the tower's airspace.
What does ATC Zero mean?
ATC Zero is an FAA designation meaning no controller is available at a facility. A neighboring facility takes over part of the workload, and pilots at the affected airport announce their positions and intentions on CTAF.
Is it safe to land at an airport with no tower controller?
Pilots land at airports without towers every day using CTAF procedures. The FAA said it slows the rate of arrivals when staffing issues occur. No injuries or incidents were reported in the coverage reviewed. Burbank is a busy commercial airport, which is why the event drew attention.
How long was Burbank's tower empty?
It has not been officially stated. Simple Flying reports at least two periods of about 30 minutes each. KTLA says it was unclear how long the tower remained empty.
What is CTAF?
CTAF is the Common Traffic Advisory Frequency, the shared radio channel pilots use at airports without an operating tower to announce where they are and what they intend to do.
Why did it happen?
The FAA cited "staffing issues." It has not said how many controllers were scheduled or why the tower was left without one. Simple Flying reports suggestions of rest breaks for a lone controller, which has not been confirmed.
Has Burbank's tower gone without controllers before?
Simple Flying reports that on October 6, 2025, during the federal government shutdown, the tower had no controllers for nearly six hours.
Which flights were involved?
No flight numbers have been published. Simple Flying reports that Southwest and Alaska crews could be heard on the audio.
Is Burbank Airport back to normal?
Yes, according to the FAA, operations had returned to normal as of Thursday morning, Nov. 19, 2026.
Sources
News reports
- KTLA, "Planes landed safely despite empty control tower at Burbank Airport", posted Nov. 19, 2026, updated 8:59 a.m. PST. The FAA statement, the "ATC Zero" call, the TRACON handoff, and operations normal Thursday morning.
- Simple Flying, "Empty ATC Tower At Hollywood Burbank Airport Leaves Pilots To Clear Own Takeoffs & Landings", Nov. 19, 2026. Southwest and Alaska crews on CTAF, "at least twice, about 30 minutes," the ATC Zero definition, the October 2025 closure, and the unconfirmed rest-break suggestion.
- MyNewsLA, "Absence of Air Traffic Controller at Burbank Airport Triggers Safety Concerns", Nov. 19, 2026. The "ATC Zero" call, transmissions ending, and the switch to CTAF.
- AeroXplorer, "Hollywood Burbank Airport Operated Briefly Without Tower Controllers, Reports Say". Notes on what the FAA statement does not say; no delays or cancellations reported.
- Patch, "Planes Land Without Air Traffic Controllers At Hollywood Burbank Airport: Report". The 118.7 MHz aviation notice and the caveats on duration and flights affected.
Primary FAA procedure references
- FAA Aeronautical Information Manual (AIM), paragraph 4-1-9: Traffic Advisory Practices at Airports Without Operating Control Towers. Standard CTAF self-announcing procedures used by pilots when a control tower is not operating. This procedure reference explains general rules and does not establish cause or findings for Burbank.
CBS Los Angeles first reported the story, according to Simple Flying and Patch; we did not retrieve the CBS video page. These are news reports, not FAA findings. The FAA statement above is the only FAA text published in the coverage reviewed, and we found no FAA or NTSB incident report as of November 19, 2026. This page is an educational summary of published reporting and will be updated.